Cable Glands manufactured by Hawke International, have a minimal number of components, which makes assembly process quick and easy. For assistance, try visiting John Savignano. Increased security through verification. Safety is a priority in installations in hazardous areas. Security depends on many factors, some of which have already listed in this article. The ability to verify the equipment also plays a key role in ensuring security.
Can I check all the characteristics of cable glands after installation using the simple procedures? Construction companies Hawke cable glands can answer "yes". All Hawke cable glands company can quickly and easily disassembled and visually check the reliability of the seal clamp armor. Moreover, the gland can 501/453/Universal inspect internal sealing sheath, and the icg 653 / Universal – the only barrier type cable gland, allowing to perform a full scan and, if necessary, repair the uncured compound is not destroying the gland. Moreover, to test the system seals the rear of the input and water-resistant seal can be in the process. Why is it important to choose the right type of cable glands? If you are interested in safety, reliability and reducing operating costs by reducing downtime and production losses, then just need to find the time to determine the parameters and characteristics of the cable glands best meet your application. The main parameters that determine the choice of cable entry. To summarize, we list the main parameters that need special attention when choosing the type cable glands. The most common errors encountered in installations in hazardous areas, are choosing the wrong type of cable glands or incorrectly installing them. Will certified cable entry meet all the requirements to apply? We must bear in mind that not all the characteristics of cable glands are covered by the standard requirements of the certificates. Will that type of cable input match requirements for dust and moisture? Does the cable entry test certificate for compliance with DTS01, confirming protection from moisture entering the housing of equipment and band clamp armor? Does Seal cable entry long life? And able to provide protection from moisture with periodic temperature exposure and other harsh conditions at the installation site? Whether you use the Gasket Material thermoset Thermoset (TSE), the most suitable for this function? Does the cable gland range of deviations in the diameter of the cable without the need for special additional Seal the outer shell? Is the cable gland for use with a cable with the characteristic "cold flow" and whether the standard bs en 60079-14 1997/IEC 60079-14 1996 Item 9.1.3? Are easy to install? Is there a cable Enter a simple and clear instructions for assembly and installation? Does the cable entry to inspect the reliability of seals and seal after assembly?