Office and professional design package laminators laminators office series is rather simple. Heating element are either plates or shafts with external heating. Office laminating machines are designed for Small volumes of work at home or small office and has a rather simple operation. Some laminators are equipped with temperature control that allows the application of a wide range of film thicknesses, function 'reverse' to stop the lamination process and return the document, allowing the operator to correct possible errors. Laminators professional series designed for the most intensive work with an expanded range of materials. They are built according to the scheme: 4 or 6 rolls that are heated from within, such a scheme provides the best quality laminating and foiling. Some models A3 – equipped with an lcd display for convenience and accuracy settings, function 'reverse' and variable speed lamination for high performance when working with the whole range of materials. Some models A3 – equipped with an lcd display for convenience and accuracy settings, function 'reverse' and variable speed lamination for high performance when working with the whole range of materials.
Consumables are a package of different format, sealed on one side, inside of which lay the paper and passed through a laminator. No special skills at the packet does not require a laminator. How to choose an optimal model for office laminator. – The first of what should be defined – the format – we recommend you focus on the maximum size of the prime considerations: the A3 laminator can laminate small document, and the apparatus under A6 size laminated sheet of ordinary A4 is already impossible. – It is important that you are going to laminate.
Photo paper or any other glossy paper with lamination does not behave like a normal printer paper. It should be remembered If you need to laminate photos, or similar paper you need laminator with hot rollers, where the temperature and pressure being applied in one spot, which enhances the quality of lamination. – The volume of laminating – lion the proportion of laminators available in a plastic housing. This is quite sufficient to meet the needs of nearly every office, but if you have a need to produce copies, you risk overheating the device. In the case of large amounts you need a laminator in a metal casing, preferably with forced cooling. – Determine for yourself the usefulness of the feature for adjusting the temperature (depending on what range of films for lamination you intend to use), speed, and presence or absence of reverse. Which laminator select for foiling? For foiling only suitable laminating with hot rollers. When using other models of possible high percentage of marriage. The most suitable temperature and velocity for each type of foil, paper and toner are chosen by experiment. Result foiling depends not only on the capabilities of laminator, but also on the quality of paper used when printing, toner. The fact that the loose and textured paper, toner falls not quite straight, so after foiling can be black spots. Faulty toner or carrier does not provide a good impression. If the foil is soldered evenly, then this may be due to insufficient heat. If the foil is left where there was no powder should be lower the temperature.